Simple Guide on DSC Alarm System

In this article, we will be providing a simple guide on how to operate DSC 1832 Alarm System installed at your premises. The guide teaches user on how to Arm/Disarm the system and it’s basic features.
 
Arming the System
 
-       Ensure you are the last person to leave the premises before Arming your system.
-       If the Green Ready light is ON, the system is ready for arming. If the Ready light is OFF, check to see that all doors and windows are closed and that motion is stopped in areas covered by motion detectors.
-       Enter your access code. As each digit is entered, the keypad sounder will beep. If the access code was entered incorrectly, the keypad will sound steadily for one second. If this occurs, press the [ # ] key and re-enter your access code. Exit the premises through the door indicated by the installer as the Exit/Entry door.
-       The panel will provide an exit delay period, indicated by keypad beeps, for you to exit the premises without causing an alarm.

Read More